Panasonic 932CR-BT4509 Operating Instructions Manual Download

Page: 33 / 44

Product servicing

If the suggestions in the charts do not solve the problem, we recommend that you take it to your dealership.
The product should be serviced only by a qualiﬁed technician.

Bluetooth

audio cannot be

heard.

The main unit is not in the Bluetooth

music mode.

Check and switch to the Bluetooth

music mode.

The Bluetooth

audio is not output from mobile phone or Blue-

tooth

audio device.

Switch OFF and ON with mobile phone or Bluetooth

audio

device for reestablish the communication.

The music is paused temporarily.

Press [BAND] button on this unit to resume music play.

Some mobile phones can not restore the A2DP communication
with music mode after ended phone conversation.

Press [BAND] button twice on this unit to restore the A2DP
communication.

Telephone voice dial does not

work.

The mobile phone does not support the voice dial function.

Change to another mobile phone which supports the voice
dial function.

The distance between user and microphone is too far apart, the
sound is low, or the surrounding is noisy.

Speak toward the microphone closer and keep the surround-
ing quiet.

Sound skipping with Bluetooth

audio

This unit and Bluetooth

device are too far apart.

Bring the Bluetooth

device closer to this unit.

There is another wireless device near this unit and interference
occurs.

Switch off the other wireless device and keep it away from
this unit.

Other wireless device is using the Bluetooth

proﬁle excluding

from main unit. (Ex. All phonebook transmission)

Switch off the transmission with wireless device.

Unable to import the telephone

directory.

The mobile phone dose not support Bluetooth

OPP (Object Push

Proﬁle) function.

Change to another mobile phone which supports Bluetooth

OPP function.

There is no telephone or name information within exported direc-
tory.

Conﬁrm the directory information is completely and correctly.

The mobile phone is too far apart or communication interference
occurs.

Bring the mobile phone closer to this unit or switch off the
other wireless device and keep it away from this unit.

Summary of Contents for 932CR-BT4509













































Search results

Summary of Contents for 932CR-BT4509

Reviews:

Related manuals for 932CR-BT4509

Brands by name

Popular brands

Panasonic 932CR-BT4509, Operating Instructions Manual

Search results

Summary of Contents for 932CR-BT4509

Reviews:

Related manuals for 932CR-BT4509

Brands by name

Popular brands