![background image](http://html.mh-extra.com/html/panasonic/3e/3e_operating-instructions-manual_264137014.webp)
Getting Started
Getting Started
27
26
Available in the U.S. only for the K-12.
Waking Up Your Computer
Do one of the following:
n
Press the power button .
n
Press the Windows button .
Locking or Unlocking the Screen Rotation
You can find the rotation lock button on the left end
of the screen, as shown on the left .
A first press on the button can lock the screen
to keep it from rotating when you tilt the tablet .
A second press can unlock the function .
Stylus Operations
Your tablet comes with a Passive
stylus . With the Passive stylus, you
can perform all the one-finger gestures
shown on pages 28 and 29 .
Getting Started
Handling and Maintenance
Operation Environment
n
Place the computer on a flat, stable surface where it is
not subject to shock, vibration or the danger of being
dropped . Do not place the computer upright or turn it
over . If the computer is exposed to an extremely strong
impact, it may become damaged .
Operating Environment
Temperature:
Operation: 0°C to 35°C (IEC60068-2-1, 2)
1
Storage: -20°C to 60°C
Humidity:
Operation: 30% to 80% RH (No condensation)
Storage: 30% to 90% RH (No condensation)
Even within the above temperature/humidity ranges, operation
for a long time in extreme environments, smoking nearby, or
operation in places where oil is used or where there is a lot of dust
will result in product deterioration and will shorten the product life .
1
Do not expose the skin to this product when using the product in a hot or
cold environment .
If the computer is wet in temperatures of 0°C (32°F) or
below, freeze damage may occur . Make sure to dry off the
computer in such temperatures .
n
Do not place the computer in the following areas,
otherwise the computer may be damaged .
– Near electronic equipment . Image distortion or noise
may occur .
–In extremely high or low temperature .
n
As the computer can become hot during operation, keep
it away from items that are sensitive to heat .
Note: It is recommended that you put your
computer to sleep before you move it.