Panasonic Electric Works Fire & Security Technology Europe AB
Jungmansgatan 12, SE-211 19 Malmö, Sweden
Tel: +46 (0)40 697 70 00 • Fax: +46 (0)40 697 70 99
[email protected] • www.panasonic-fire-security.com
Fire alarm systems
Analog base
3312F / FL
•
Common base for the different analog detectors
•
Fast connectors
•
Label holder recess
Common base
The analog base 3312F / FL is connected to
a COM loop. Analog heat, smoke and multi
detector types 33xx / 43xx can be plugged in
the base. (See Product Leaflet for the
detector type respectively, for type of base.)
Fast connectors
3312F has fast connectors (blue) for the
COM loop (in/out). 3312FL also has fast
connectors (grey) for an external indicator
(LED), e.g. 2218.
Label holder
A label holder could be mounted in the base
(in the label holder recess). The label holder
is intended for a label showing "zone-
address" or "technical number" information,
which can be read also when the detector is
plugged in the base.
Miscellaneous
The base has an address label (Al) where the
detector's COM loop address is to be
written.
Individual fault signal is obtained if wrong
type of detector (compared with the
programming) is plugged in the base or if
the detector is unplugged.
When a detector with a locking screw is
plugged in the base, the detector can be
locked in its base to prevent theft.
The position of the detector's built-in LED is
marked in the base for correct mounting
position of the base.
For more information regarding detector
types, connections, etc. see Planning
Instructions and connection diagrams for the
system respectively.
Product applications
Used for analog detectors in the systems
EBL512 / 128
/ 1000 / 2000.
The base is intended for indoor use and in
dry premises.
