Panametrics HydroProII, User Manual

Page: 82 / 104

Appendix A. HygroPro
II
HART
®
Field Device Specification
70 HygroPro
II
User's Manual
Request Data Bytes
Response Data Bytes
Command-Specific Response Codes
A.9.34 Command 193 (0xC1): Sends new password
This command will send a new password to the HygroPro
II
. If the user has the right, the transmitter changes the user
password.
• General user only can change the General user password.
• Advanced user can change the General user password and Advanced user password.
Request Data Bytes
Response Data Bytes
Byte Format Description
0 Unsigned-8 Enum User level:
0: None
2: Operator User;
3: Admin User;
1 ~ 4 Unsigned-32 User password
Byte Format Description
0 Unsigned-8 User level:
0: None;
2: Operator User;
3: Admin User;
Code Class Description
0 Success No Command-Specific Errors
1-4 Undefined
5 Error Too Few Data Bytes Received
6-127 Undefined
Byte Format Description
0 Unsigned-8 User level: 2: Operator User; 3: Admin User;
1 ~ 4 Unsigned-32 User password
Byte Format Description
None