
DewPro® MMR30 Installation & Operation Manual
15
Chapter 4. Optional Display/User Interface
Chapter 4. Optional Display/User Interface
4.1
Installation
If the DewPro is equipped with an optional display/user interface, follow the procedure below to access the buttons.
Figure 14: DewPro with Display Assembly
4.1.1
DewPro with Display Assembly
1.
Unscrew and remove the protective window lid from the top of the DewPro (as shown in Figure 14 above),
exposing the display module below. The buttons V, H, + and - are now accessible.
4.1.2
Replacing the Display
1.
The display unit snaps onto the printed circuit board, resting on four posts. When removing the display, push one
post to the outside, using a small screwdriver, and pull the display out.
2.
Then unplug the display cable.
Summary of Contents for DewPro MMR30
