3
V
T1
5
1
2
-I
P
ENABLED
15A
GROUND
NETWORK
Outlet 1
1
2
3
4
5
6
7
8
9
10
11
12
Outlet 2
Outlet 3
Outlet 4
Outlet 5
Outlet 6
Outlet 7
Outlet 8
Outlet 9
Outlet 10
Outlet 11
Outlet 12
POWER
PROTECTION
BlueBOL
T
10 Ft. Power Cord
with NEMA 15A Straight Plug
Outlet Indicators
The VT1512-IP features 12 outlets. With no Blue-
BOLT connection the outlets will sequence on from
1-12 and turn off in the reverse sequence. When
controlled via BlueBOLT, you have control of all 12
outlets individually
LED lights indicate outlet status:
BLUE:
Indicates power status for an individual outlet
OFF:
Indicates power is off for an individual outlet
Mounting Bracket Holes (4)
PRODUCT FEATURES
www.panamax.com
Circuit Breaker:
Automatically trips when the load exceeds
15 amps. Push to reset.
Rocker Power Switch:
When switched off all outlets turn off
immediately. When switch on, outlets turn
back on in sequence.
LED Indicators:
Power On:
Illuminates when power is present to the de-
vice.
Note:
Check status indicators for individual outlets
to determine if each outlet’s power is on or off.
UNSAFE VOLTAGE:
The Protection OK secondary
Indication is for the status of the VT1512-IP’s Over/Under
voltage load disconnect feature. If the line voltage is less
than 85 Vac or greater than 140 Vac, the outlets will shut
off and the Protection OK indicator will flash green. Power
will automatically be restored when voltage returns to a
safe level and the outlets will sequence to the original
state prior to an over/under voltage load disconnect.
PROTECTION OK:
Indicates status of the VT1512-IP’s
Protect-or-Disconnect surge protection feature. If the
POWER LED is illuminated but the PROTECTION OK LED
is off, contact Panamax technical support.
BlueBOLT:
Indicates status of BlueBOLT connection.
OFF:
Not connected to an active local area network (LAN)
GREEN:
Connected to an active LAN, but cannot contact
the BlueBOLT server/cloud
BLUE:
Connected to an active LAN and is connected to
the BlueBOLT server/cloud.
Network Connector:
Connect an Ethernet cable (not
provided) between the NETWORK port
and an Internet router or modem with
an established Internet connection for
remote control and monitoring.
Network Reset Button:
Press using a safety pin, ball point pen or
other small object to reset connection to
BlueBOLT cloud.
Ground Lug:
Connect Panamax signal-line protection
modules grounds to this terminal. Protect
data lines as well as AC lines from
surges is required for the connected
equipment warranty.
Outlets 4 - 8:
Rotated 90° to accommodate large transformers (wall warts).
Outlets 1 - 3:
Spaced to accommodate large transformers (wall warts).
V
T1
5
1
2
-I
P
ENABLED
15A
GROUND
NETWORK
Outlet 1
1
2
3
4
5
6
7
8
9
10
11
12
Outlet 2
Outlet 3
Outlet 4
Outlet 5
Outlet 6
Outlet 7
Outlet 8
Outlet 9
Outlet 10
Outlet 11
Outlet 12
POWER
PROTECTION
BlueBOL
T
DETAILED VIEW
Network Reset Button:
Network Connector:
Rocker Power Switch:
Circuit Breaker:
LED Indicators:
