background image

STEP 1:

Once the Max In-Wall AC Base Unit is installed (see the instructions that come with the base unit), connect the signal wires to 
the module.  Be sure to follow the appropriate color-coding or pin-out diagram.  In-wall connections depend upon the module 
and type of signal-lines being protected.  Connection types may include: 
   • Wiring pigtails with color-coded BNC connectors for Audio/Video 
   • F Connectors for antenna, cable or Satellite TV lines
   • 3.5mm stereo jacks for IR repeaters, 12 Volt triggers or L/R audio with common ground
   • RJ-11 / RJ-45 jacks for telephone or network lines
   • Screw-terminals for RS232 lines

Note:

 Protection circuits and their operational characteristics (bandwidth/frequency range, clamping voltages, attenuation, etc.)

are optimized for the intended application.  Satellite TV circuits and antenna/cable TV circuits are different and cannot be
interchanged.  

MIW-5RCA

MIW-VGA

SPRING 
BALL

REMOVAL
   TOOL

RAISED
HOLES

MIW-SVIDEO

MIW-DATA

STEP 2:

Carefully feed the signal wires through the base unit as you insert the module into the opening.
The module may be installed with either end up, since there are two rows of retention dimples in the base unit. Depress the 
spring balls on the module as they reach the face of the base unit (this will help the module slide into the opening).  

The module can be installed to three depths; flush with the faceplate, half-depth or full-depth.  The depth of installation just 
depends on how you need the cables to dress.

STEP 3:

Connect cables (not included) to the equipment.

To remove a module, simply insert the included removal tool into the raised holes on the module face and pull.

Panamax MIW-Modules Installation Instructions

TERMINAL BLOCK HEADER

RJ-45 JACK

RS232 

OUTPUT

RS232 

INPUT

1
2
3
4
5
6
7
8

RJ-45 JACK

RJ-45 JACK

ETHERNET 

OUTPUT

ETHERNET 

INPUT

1
2
3
4
5
6
7
8

1
2
3
4
5
6
7
8

MIW-DATA

 - INWALL 

RS232

 DIAGRAM

• MIW-5RCA   • MIW-VGA    • MIW-SVIDEO     • MIW-DATA

MIW-DATA

 - INWALL 

ETHERNET

 DIAGRAM

MIW-VGA

 PINOUT DIAGRAM

5 RCA
CONNECTORS

RS232

ETHERNET

RS232

ETHERNET

1
2
3
4
5
6
7
8

SVIDEO

1690 Corporate Circle, Petaluma, CA 94954    •   Fax 707-283-5901   •   www.panamax.com

INS0733 REV. D        1/05

1

2

3

4

1 - Yellow Shield

2 - Yellow Center

3 - White Center

4 - White Shield

MIW-SVIDEO

 - 

PIN CONNECTOR
DIAGRAM

Reviews: