4
1690 Corporate Circle, Petaluma, CA 94954 • www.panamax.com
FEATURE OVERVIEW
Switched
Outlets
Pushbutton:
1 of 2 Triggers that
can activate a turn-
on or shutdown
sequence for the
Isolated and High-
Current outlets.
Lamp
Receptacle:
For the 5W-halogen
Convenience Lamp.
Use to illuminate
working area &
other components.
LED Indicators:
Status indicator lights
for Switched Outlets,
DC Voltage Triggers,
and Unsafe Voltage
Lamp and Meter
Dimmer:
Controls brightness
of the Ammeter,
Voltmeter
backlighting and
Convenience Lamp.
High-Current Outlet Bank:
Two delayed outlets designed
for High-Current components
such as amplifiers and
powered subwoofers.
The current available to
connected equipment is
not limited by the noise
filtration components.
Rear Panel
Convenience Lamp
Receptacle:
Voltage Sense Trigger Inputs:
3.5 mm Mono Mini-Plug jacks. Connect to a remote
trigger device that provides 12VDC to trigger a startup
/ shutdown sequence. This is the second trigger that
will activate the MAX
®
5510 turn-on or shutdown
sequence. (See switched outlets pushbutton on front
panel).
High-Current Outlets
Turn-On Switch:
3-position slide switch.
Allows adjustment of the
Turn-On delay for the 2
High-Current Outlets.
Choose between 0, 10
and 30 seconds.
Isolation Transformer Outlets Turn-Off Switch:
3-position slide switch. Allows adjustment of the
Turn-Off delay for the 4 Isolation Transformer Outlets.
Choose between “Always-On”, 10 and 30 seconds.
Satellite Coax Jacks:
Two pair of gold plated
F-Connectors optimized for
Satellite TV signal line protection.
Cable TV Coax Jacks:
Gold plated F-Connectors
optimized for Cable TV or
non-amplified Rooftop
Antenna signal line protection.
Telephone Jacks:
In/Out connections
for telephone line or
pay-per-view line
protection.
Isolation Transformer
Circuit Breaker:
Opens in the event that
equipment connected
to the Isolated Outlets
exceeds 4 amps current
draw. When white is
visible, the breaker has
opened. Reduce the
load and push to reset.
Voltmeter:
Backlit analog meter
measures incoming
voltage source from
0-150 VAC.
Ammeter:
Backlit analog meter
measures current draw
for connected equipment
up to 15 Amps.
Convenience Outlet:
Provides a quick convenient
way to plug in components
such as camcorders and
video game systems.
IEC Main Power
Receptacle:
Power cord connects
to this receptacle.
15A Circuit Breaker:
Opens in the event that
equipment plugged into
the MAX
®
5510 draws
too much current. When
white is visible, the
breaker has opened.
Reduce the load and
push to reset.
Ground Lug:
Provides a
common
grounding point
for equipment
with separate
ground leads
Filtered Outlet Bank 1:
Two Always-On, Balanced,
Double L filtered outlets
for Low-Current analog
components such
as pre-amplifiers,
receivers, VCRs
and tape decks.
Isolation Transformer
Outlets:
Four outlets provide either
Isolated or Balanced power
for digital source components
such as DVD or CD players.
Use the front panel AC
Regeneration pushbutton to
select the desired power mode.
Filtered Outlet Bank 2:
Two Always-On, Balanced
Double L filtered outlets
for Low-Current analog
components such
as pre-amplifiers,
receivers, VCR’s
and tape decks.
AC Regeneration
Control and LED
Indicators:
Select either Isolated
or Balanced power for
your digital source
components.
AV RCA Jacks:
Four pair of RCA style
connectors. Circuits are
optimized for audio and
video signal line protection.