background image

1

© 2007 PANAMAX, INC.  All Rights Reserved.

PANAMAX, the Panamax logo and MAX are registered US trademarks of Panamax.   

ACRegenerator, Firewall for Noise, Protect or Disconnect and SignalPerfect are trademarks of PANAMAX. 

SIDACtor is a registered US trademark of Teccor Electronics, Inc.   TiVo is a trademark of TiVo, Inc.

MODEL:  M7500-PRO

IMPORTANT SAFETY INSTRUCTIONS

1.

Read these instructions.

2.

Keep these instructions.

3.

Heed all warnings.

4.

Follow all instructions.

5.

WARNING:

Do not use this apparatus near water. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. 

6.

Clean only with dry cloth.

7.

Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 

If the M7500-PRO is installed in a rack, this

“blank” must be installed directly below the M7500-PRO to ensure proper ventilation.

8.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9.

Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10.

Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the

apparatus.

11.

Only use attachments/accessories specified by the manufacturer.

12.

Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply

cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not

operate normally, or has been dropped.

13.

Where the power cord is used as the main disconnect device, the disconnect device shall remain readily accessible.

14.

This device must be connected to a main socket outlet with a protective earthing connection.

MAX

®

7500-PRO Home Theater Power Management Owner’s Manual

M7500-PRO

POWER FILTRATION AND 

REGULATION ACTIVE          

           HIGH CURRENT

 GROUND

ISOLATION

ACTIVE

BANK 1 ON       BANK 2 O

N       BANK 3 ON       BANK 4 ON     

     BANK 5              BANK 

 HC 1 ON           HC 2 ON

BRIGHTNESS 

PRESS: 

METER SELECT

Home Theater 

Power Manageme

nt

AUTO

Summary of Contents for M7500-PRO


















Reviews: