4
www.panamax.com
C3-IP Quick Start Guide
POWER
Blue Flashing quickly:
Switch/breaker is off or tripped .
Blue Flashing slowly:
Indicates that a power sequence or
power cycle is in progress .
Blue On:
Outlets are on .
PROTECTION OK
Green off:
Power is on, and the surge protection fuse is intact .
Green off with switch/breaker on
indicates that surge protection fuse is blown OR
Green off with switch/breaker off or during over/undervoltage event:
inconclusive
UNSAFE VOLTAGE
ON during Overvoltage or Undervoltage event .
BLUEBOLT
Green flashing:
Acquiring IP address via DHCP .
Green solid:
IP address acquired (
Note:
it does not stay in this state very long before
going to establish communication with BlueBOLT .)
Blue flashing:
Attempting to establish communication with BlueBOLT .
Blue solid:
Communication with BlueBOLT established .
Your C3-IP can be controlled and monitored from anywhere in the world using the
BlueBOLT cloud .
On-Line Registration
– The C3-IP is completely plug-and-play and does not
require any software installation . The online BlueBOLT control interface is operated
through an Internet web browser .
Note:
Turn off all the equipment being connected to C3-IP until after all the
connections (including AC) . It’s recommended to turn the connected equipment
back on sequentially one unit at a time .
The total output of the 3 AC outlets shall not exceed 12A
LIGHTS
MOUNTING
Use four #10 size screws to mount the C3-IP
to a wall or within a structured wiring can .
A.
Using any Internet connected computer go to
standard Internet browser .
B.
Follow the on-screen prompts to add a
Location
, and then to add a
Device
.
Note:
MAC address information is attached to this Instruction Manual as well as
on the bottom of the C3-IP . It is recommended the spare MAC address label be
adhered to the unit or stored in a secure location .
C.
Once you input the MAC address and included Challenge Key, if BlueBOLT
cannot detect your device (please allow up to 20 seconds), please follow the
on-screen troubleshooting guide . Also confirm the C3-IP is properly connected
to your networking equipment .
BLUEBOLT
The enclosure includes screw-holes to install, as well as mounting brackets (0 .125
inch powder-coated steel) that secure the unit to the vertical posts of a standard
equipment rack . The brackets are able to be attached to the enclosure in multiple
directions in order to accommodate many different racks and positions .
7.35”
5.5”
7.35”
5.5”
Plan for and allow space for cords, plugs, wall-warts and transformers.
With the provided power cord, the C3-IP should
be installed within close proximity to a main
socket outlet .
0 .5m IEC power cord
1.75”
OUTLET
2
OUTLET
3
GROUND