background image

  HIJO DE MIGUEL 

PANADERO 

 

 
 

     It is also important to clean the smoke outlet tubing periodically and 
check there are no blockages before relighting fuel after a long period 
of non-use. At the start of each season a professional should carry out a 
revision of the installation. 
 
     Any replacement part which  you may need must  be recommended 
by us. 
 
Commissioning and handover 
 
     Ensure all parts are fitted in accordance with the instructions. 
 
     On completion of the installation allow a suitable period of time for 
any fire cement and mortar to dry out,  before lighting the stove.  Once 
the stove is under fire check all seals for soundness and  check that the 
flue  is  functioning  correctly  and  that  all  products  of  combustion  are 
vented safely to atmosphere via the chimney terminal. 
 
     On completion of the installation and commissioning ensure that the 
operating instructions for the stove are left with the customer. Ensure to 
advise the customer on the correct use of the appliance and warn them 
to use only the recommended fuel for the stove. 
 
     Advise the user what to do should smoke or fumes be emitted from 
the  stove.  The  customer  should  be  warned  to  use  a  fireguard  to  BS 
8423:2002  (Replaces  BS  6539)  in  the  presence  of  children,  aged 
and/or infirm persons. 
 
 
 
 
 

  

10

Summary of Contents for SIERRA

















Reviews: