Panacom S10CM, User Manual

Page: 3 / 16

Pg. 3
SP-3110CM PORTABLE SPEAKER
User’s Guide
Thank you for purchasing SP-3110CM Panacom’s Portable Speaker.
Please read the manual carefully before operating.
PRODUCT FEATURES
• Led lights effects
• USB/TF card
• Wired microphone
• Wireless BT connection • Rechargeable battery
• 1 Mic input jack • 20W RMS
• Subwoofer Unit: 12” • Lithium battery: 1800mAH
• Tweeter Unit: 3.5”
• AUX in
ATTENTION
The product has been installed with battery, making it applicable to the outdoor singing,
advertisement, recreation and other activities. Please charge the battery before using it outdoors,
so as to guarantee that the machine can be used for a longer time outdoors. The machine has
been set with power switch circuit. When you connect the adaptor to the power and insert the
plug to the charging interface, the machine will switch to the power supplied by the adaptor
automatically and charge the built-in battery. When the adaptor interrupts the power, the machine
will intelligently switch to the built-in battery for work continuously. When adaptor is used to
charge the battery, the integrated intelligent charging circuit within the machine will give hints
about charging and the charging indicator lamp will light.
After charging is finished, the intelligent charging circuit will give hint to that that the charge
has been fully charged and light the charging indicator lamp. At this moment you can close the
AC power of the adaptor. If you still use adaptor in the machine to work, the charging circuit
will automatically cut off the charging circuit and it is unnecessary for you to worry about the
charging breaking. You shall notice that the battery has certain service life and it is beyond
the warranty scope of the company. Under general circumstances, the built-in battery needs
charging 8-10 hours. With more charging times, the battery volume will change and full charging
time will reduce accordingly. When the battery is out of charge after being used for a short time,
please change the built-in battery. The user shall also notice that if the electricity quantity of the
battery is reduced when using the machine outdoors, please close the power switch on the rear
plate and charge the built-in battery within 24hours. If the electricity quantity of battery is totally
consumed, the situation that the battery can not be charged and the service life is expired will
happen. When you don’t use the machine for a long time and leave it alone, please charge the
battery every six months, so as to avoid the invalidity of battery.
PANEL/REAR PLATE/MP3 FUNCTION AND OPERATION
When you need to use the built-in MP3 encoding function, please format your USB disk (U disk
for short below) as FAT32 format in computer first and then copy the file in MP3 format in U disk.
When reading USB disk, the encoding system will engage in encoding playing according to the
generation sequence of MP3 songs file. Therefore, the song which is copied to U disk first will be
played in priority or vice versa. When the user needs to play according to the specific sequence,
they can arrange the copying sequence. If the files copied to U disk can not be played, please
inspect whether the file format is in MP3 format. If not, please switch to MP3 format in computer
and then copy to U disk in order to play normally. When copying MP3 file, you shall copy to the
catalogue of U disk. It is suggested to delete all the unnecessary files and file catalogues in order
to reduce the occurrence of reading error when the encoding is played. When the user buys U
disk, please select the ones with better quality and internal encoding supporting
64MB/128M