Panacom PA-7550, User Manual

Page: 4 / 20

Pg. 4
again to go into the setting and press UP or DOWN key to change
the default setting. When finished, press SET to confirm and go into
the next item setting. You can leave the set up mode at any time
with DEL key.
Date and Time Setting
In on hook state, press SET key, LCD will display “SET 1 DATE”,
press SET to confirm. Press SET again, the digit for year will flash,
use UP or DOWN key to edit the year, then press SET to confirm and
carry on the next step set the month. Repeat the same operation to
set the month, day and the real time clock. When finished, LCD will
display the correspond calendar.
The Area Code Setting
In on hook state, Press SET key then press UP key, LCD will display
“SET 2 CODE” , then press SET to confirm. LCD will display “CODE:
---“ and “ - ” will be flash to indicate to set first area code. Press
UP or DOWN and then press SET key to select the first or second
area code or edit it from 0 to 9, and press SET to enter. Press UP or
DOWN to adjust the area code number and press SET to confirm.
Repeat this operation to the last digit.
P-CODE Setting
In on hook state, press SET key then press U key twice, LCD will dis-
play SET 3 P OCDE, press SET to confirm, LCD will display LCODE
--- , and “ – ” will flash to indicate to set first long distance code or
press UP or DOWN key to select the second ‘ – ’ press SET key to
confirm. Repeat this operation to the last digit.
AUTO-IP Setting .
In on hook state, press SET key and then press UP key three times,
LCD will display SET 4 AUTO IP, press SET to confirm, and LCD will
display AUTO IP OFF and the OFF will flash. Press UP or DOWN key
to turn ON or OFF the auto IP dialing function. if you select the AUTO
IP ON, press SET to confirm and the LCD will display INPUT CODE,
you can input the IP service number, card number and the security
number with DEL key to correct the input mistake. When finish, press
SET to exit, after you turn to the auto IP function, every time in –