Panacom M11W, User Manual

Page: 3 / 12

Pg. 3
MC-9711W WIRELESS MICROPHONE
Thank you for purchasing MC-9711W Panacom’s Wireless microphone
Please read the manual carefully before operating.
OPERATION
1. RECEIVER: Connect the receiver to the mixer or amplifier, use the audio cable connect from
the Mix out port to the Mixer’s Mix in port; connect to the power, adjust the antenna, turn on
the power switch, the power indicator light up, the receiver working. (Don’ t put the receiver to
the corner to be sure have the good signal )
2. MICROPHONE: Install the battery, push the handheld microphone switch to “ON”, indicator
light on, at the same time the receiver indicator light on, at the same time the receiver indicator
light on, mean the receiver receive the signal, adjust the suitable volume, the handheld
microphone can working. Please push the power switch to “OFF” when you don’t use it. (When
the Indicator darker, mean low battery, please change the battery)
Note
-Read the operating instructions-must read all the safety and operating instructions carefully
before use the machine.
-Beware of electric shock or fire, the body must be placed to avoid rain or moisture.
-Do not arbitrarily open the body, or you will not have the warranty.
-Ventilation. The use and storage offlle machine need to have good ventilation environment,
equipment space at least more than 30mm.
-Power-please use the standard power Volts marked in the machine.
-Follow the instructions of the machine and all operations Suitable.
SIMPLE FAULT HANDLING
1.Turn on the receiver power switch, the power indicator light is not on. Check whether the
power cord is plugged in, whether the power supply socket has electricity or not.
2.In front of the microphone speech signal is normal, but no sound output, check if the volume
knob is adjusted to the minimum, the audio line is connected.
3.Using distance became more short, the signal is not stable, check whether the antenna is
connect,if the transmitter battery is under pressure, the receiver position is correct, if have the
strong electromagnetic field interference.
4.Poor sound quality, check whether the battery is under pressure, whether there is a high
frequency signal of the same frequency, do not use twoidentical frequency machines at the
same time and the same location (at least 100 meters apart)
Due to continuous improvement of product technology and specifications, the factory reserves
the right to update and improve the products and specifications described in the specification.