Panacom LP-8804, User Manual

Page: 7 / 20

Pg. 7
BT Connection Output function
- To connect BT Connection speakers via BT.
- Turn on the BT Connection speakers when the turntable is on,
and then turn BT Connection speakers to BT mode, then it will
connect directly.
- If cannot connect quickly, press the NO.3 BT connection reset
button once.
Selection of built-in speakers or output BT Connection speakers
- Turn the button of NO.6, can choose built-in speakers or BT speakers.
- When turn to off/turn up, it will play the built-in speakers.
- When turn to on/turn down, it will play the output BT
Connection speakers.
1) Push the arm lock to release the tone-arm.
2) Take off cap of the cartridge to expose the needle out.
3) Separate the cartridge from the socket lightly.
4) Take off the audio-line from the cartridges completely.
MAINTENANCE
Replacing the stylus
5-8) To fit a new one just in opposite deals. Insert the audio-line
accordingly, and install the cartridge to the socket ligthly.