Panacom LP-8800, User Manual

Page: 9 / 42

Pg. 9
It can be charged by DV 5V power adapter. When charging, the
LED light is green. When finish charging, the LED light is off.
HOW TO REPLACE THE NEEDLE
To replace the needle, please refer to the instructions below.
Removing the needle form the cartridge.
1. Place a screwdriver at the tip of the needle heads hell and
push downwards in the direction shown in sketch “A”
2. Remove the needle head shell by pulling it forwards and
pushing downwards.
Inserting the needle
1.Hold the tip of the needle head shell and insert it by pressing
in the direction illustrated by “B”
2.Push the needle head shell upwards in the direction illustrated
by “C” until the needle locks into the tip position.
HOW TO REPLACE THE STYLUS
- Hold the tone arm with one hand to support it as you take
either side of the stylus with your thumb and forefinger of the
other. Gently pull the stylus forward slightly then move it down-