Panacom K16WM, User Manual

Page: 6 / 16

Pg. 6
V. THE WIRELESS BT CONNECTION:
1.ON/OFF: switch the power to ON, press the key “MODE” to enter the mode of
Bluetooth, the display screen will show “BLUE”.
2.Switch on the Bluetooth function of Mobile phone and searching , while the
Mobile phone shows “SP3416”, click the connect directly . mobile phone
connection do not need password , if need password , please input”0000” to go
on pairing . After success pairing , the speaker will send out a voice of prompt . it
is success pairing between mobile phone and Bluetooth speaker.
3.Play the music of your mobile bphone directly and will give out beautiful voice
from speaker.
VI. OPERATION INSTRUCTIONS ON REMOTE CONTROL
1. Power Button: Short press it to enter standby mode; short press it again to
resume. If no device is connected, the system goes to “-NO-”.
2. : Functions as “ ” on the master device.
3. : Functions as “ ” on the master device.
4. : Functions as “ ” on the master device.
5. Mode: Functions as “Mode” on the master device.
6. V+/V- Keys: In USB/TF/AUX mode, press them to volume up/down.
7. Numeric Keys 0~9: In USB/TF card reading status, to play Track 12, just input
numbers “1” and “2”, and in 2 seconds the system will go to Track 12 and start
playback. Any input of number larger than number of the total available tracks
is invalid. In FM status, to listen to channel 107.5MHZ, just input “1075”.
8. Environment Key: In USB/TF card reading status, short press it to toggle
among Square, Meeting, Home, Hall and Personal modes.
9. Sequencing Key: In USB/TF card reading status, short press it to toggle
among four playback sequencing modes (All - play all tracks in sequence;
RAND - play in random; ONE - repeat one track; FOL - repeat all tracks in a
folder).
10. : In USB/TF/AUX mode, shortly press it to mute the device.
11. 100+: Number selection key - in MP3 mode (USB/TF card), short press it to
add “100” to current track number.
CAUTION: Please Be sure to charge while music distorted.