PANA
7
MAINTENANCE & CLEANING
Maintenance
Each time before putting the trolleys into service the user must check that –
•
Lubrication of all the mechanical joints/pins / moving parts / tightening of
the bolts should be carried out at least once in three months, to avoid
unnecessary sound and wear & tear of the Trolleys
•
At regular intervals carry out a visual inspection and check for any
mechanical damage (e.gloose I missing rivets, screws, etc.)
•
If any damage or malfunction is observed, immediately report this matter
to the operator
•
If the trolleys is not in use, it should be stored in a dry and rodent free
indoor environment on a flat surface with a gradient not more than 5
degrees
•
If the trolleys is not in use for a long term, it is necessary to conduct a test
to check for functioning and any mechanical damage that may have been
caused
•
Depending on the usage, certain moving parts may require replacement
due to wear & tear. We recommend timely replacement with original
spares for safety and trouble-free operation
Cleaning & Disinfecting
•
The trolleys is not suitable for machine wash or steam cleaning
•
Do not use water jet for cleaning
•
The trolleys cannot tolerate the influence of strong solvent, basic or
alkaline liquids & caustic agents
WARNING :
Do not use the trolleys for purposes other than the intended use
as it may cause damage to
the patient/equipment
With due consideration to environmental limitation, materials
used to make the device are
not affected by contact with any biochemicals or biowaste when
used as per its intended purpose, all materials used in the product
and accessories do not facilitate breeding or growth of bio-
contaminants on their own.