Blue Eagle ll Ultra Noise Cancelling Headset
USING THE HEADSET WITH A BLUETOOTH-
ENABLED PHONE
Connect headset to your phone
Before you begin, make sure the headset is on.
If the Blue Eagle II does not automatically connect to your phone, then
you can select the Bluetooth menu on the handset to complete the
connection (consult your phone’s user manual) If your phone is the last
device that connected to the Blue Eagle II, you can press the multi-
function button on the headset for 1 second and release. The headset will
connect to your phone automatically. After the connection is built, the blue
indicator light will flash once every 2 seconds. The headset is in Standby
Mode and your call will transfer to headset automatically.
Make a Call / End a Call
Before you begin, make sure the headset is on.
1.Turn on the Blue Eagle II and position the microphone properly.
2.If the headset is in Idle Mode, follow the procedures under Connect
headset to your phone.
3.Dial the phone number.
4.To end the call, short click the multi-function button on the headset.
You will hear a “beep” sound and the call is disconnected. The
headset will revert to Standby Mode.
Answer a Call / End a Call
Before answering, make sure the headset is on.
1.Turn on the Blue Eagle II and position the microphone properly.
2.When a call is coming in, you will hear a melody of tones in the
earpiece. Short click the multi-function button and the call will
be picked up and transferred to the headset. If you are unable
to hear the melody of tones in the headset, please make the
headset connection to the phone by following the procedures under
“Connect headset to your phone”
.
3.To end the call, short click the multi-function button on the Blue
Eagle II headset. You will hear a beep. The call is disconnected and
the headset reverts to Standby Mode.
