© Pan Acoustics GmbH
V 1.0
Page 8 of 16
Manual
8.2. Electrical connection
8.2.1. P SW-108 | RJ (low impedance)
SECURING THE LOUDSPEAKER
The loudspeaker P SW-108 | RJ has an additional securing point at the back of the enclosure. An
eye bolt with an M10 thread can, for example, be screwed in here to secure the loudspeaker against
falling down by means of a safety rope.
The low impedance variant of the loudspeaker P SW-108 | RJ is equipped with an RJ45 socket with
high electrical and mechanical load capacity at the back. The contacts of the RJ45 socket are wired in
such a way that 4 wires of a network cable are combined for low-impedance signal transmission. This
connection variant permits to connect the loudspeaker to power amplifi ers with corresponding socket
and assignment using 23 AWG or 24 AWG network cables. Alternatively, an adapter cable is available
to operate the loudspeaker with DSP power amplifi ers that do not have an RJ45-compatible port.
Step 1:
Make the connection panel accessible.
Connection cables must not be used for fi xing or suspending loudspeakers.
WARNING
To avoid damage to the product or to other IT
equipment, e.g. switches (PoE), the loudspeak-
er must not be connected to such devices.
CAUTION
