© Pan Acoustics GmbH
V 1.0
Page 5 of 18
Manual
Doc. no
.: 01796.V1 - 10.2023 [tr
anslation based on German v
ersion]
In order to prevent falling object injuries,
•
this product is to be fastened to building fi xtures with friction-locking connections using suitable
connector elements according to the installation instructions. The base surface is to be checked
for suitability of installation and, where required, prepared by qualifi ed personnel.
•
the connections and components delivered by Pan Acoustics or expressly mentioned
in this manual are to be used.
•
the load-bearing elements and connections are to be checked regularly for wear and loosening.
To minimise the risk of fi re or electric shock,
•
the product must not be opened. It does not contain any parts that can be serviced by the user.
•
the product must not be exposed to moisture or humidity, except for products with an appropriate
IP protection class.
•
no objects fi lled with liquid (e.g. bottles) must be placed on top of the product.
•
the product must not be exposed to excessive heat, direct sunlight, fi re or the like.
•
no open sources of fi re (e.g. candles) must be placed on top of or under the product.
To prevent injury, this product must be taken out of operation, clearly marked and secured against
accidental operation if the product
•
shows signs of visible damage.
•
contains loose parts.
•
no longer works fl awlessly.
•
has been stored for a long time under unfavourable conditions (e.g. in humid rooms).
•
was exposed to severe transport stress (e.g. with unsuitable packaging).
To avoid injuries such as hearing damage due to excessive volume levels, persons should
•
never stand directly in front of a connected loudspeaker.
•
not be exposed to high volume levels over a long period of time.
To prevent injuries, electric shock and fi re, ensure that all persons involved in the set up, operation,
dismounting or installation of the product/system have read this operating manual.
To prevent damage to the product, avoid
•
generating acoustic feedback.
•
playing back distorted signals of high power over a long period of time.
•
generating impulse-like sounds (e.g. popping noises) which occur when a media player is switched
on, connected or disconnected.
Product and operational safety
•
The product is completely disconnected from the signal network when the signal connector is
removed.
•
The product may only be cleaned from the outside using a dry cloth.
•
The original packaging or an appropriate transport box (fl ight case) should be used when trans-
porting the product. The product must be protected against vibrations.
NOTICE
CAUTION
WARNING
DANGER
