© Pan Acoustics GmbH
V 1.0
Page 13 of 18
Manual
The product is suitable for operation in an ambient temperature from -10 °C to +50 °C. If the prod-
uct is operated below 0 °C, the device must be operated by means of a continuous signal in order to
prevent the loudspeaker chassis from freezing.
Before operating the device for the fi rst time, it must be acclimatised. Avoid exposing the device to
aggressive chemical liquids and vapours. The device must not be covered up by textiles. Take pre-
cautions to prevent the enclosure from heating up due to direct exposure to sunlight or powerful
spotlights. The device must also not be exposed to strong vibrations.
8.4.
Operation on the power amplifi er
9. Operating conditions
Service and repair work may only be carried out by persons and partners authorised by Pan Acoustics.
No service or repair measures are to performed on the device that exceed the statements made in
chapter 11 “Maintenance”.
Contact data:
--> see chapter 15 “Contact address”.
The following measures must be carried out at regular intervals:
Cleaning
The enclosure should be regularly dusted off with a damp cloth and checked for damage.
Visual and functional check
The installed device should be regularly subjected to a visual check.
The following checks must be carried out:
•
Check the wall and ceiling mount for a fi rm fi t.
•
Check the enclosure for damage.
•
Check the connection cable for damage.
10. Service and repair
11. Maintenance measures
The declaration of conformity for the relevant product from the Pan AMT series can be requested from
Pan Acoustics.
12. Declaration of conformity
The waste bin symbol indicates that electrical and electronic devices must not be dis-
posed of with household waste after their useful life. This symbol can be found on the
type plate of our products. Dispose of the device in accordance with the applicable regu-
lations and any contractual agreements. If you have any questions about disposal, please
contact your dealer, distributor or us.
13. WEEE declaration (disposal)
The loudspeaker P 04-AMT | RJ must be operated on a correctly confi gured DSP amplifi er or amplifi er
with upstream audio DSP. The power of the amplifi er to be used must be limited to 20 watts (pro-
gramme) and 60 watts (peak). Further technical descriptions of the loudspeaker can be found in the
technical data --> see chapter 17 ”Technical data loudspeaker”.
DSP settings for various DSP amplifi ers and DSP audio platforms for sound equalisation can be down-
loaded from the Pan Acoustics website www.pan-acoustics.de. If you have any technical questions,
you can also contact our support team at [email protected].
The RJ plug connections on the power amplifi er or on the loudspeaker must not be plugged
or unplugged under load. Plugging or unplugging the RJ plugs under load will cause elec-
trical damage to the contacts in the socket or on the plug.
WARNING
