Operation
Connect the power cable to a 120V 13A supply which is located
in a safe, dry area.
The switch on the heater is used to control the Heater. When
the position mean on the
【
ON
】
, the first indicator light will
be turn red, the heater will be in standby mode. The
【
OFF
】
position will turn off the Heater.
The panel control:
When the switch is on the
【
ON
】
position, press the remote
control once, the heater will be on 1500W power. Press the
remote control again, the heater will be in standby mode.
You can also press the
on the panel control . When
the switch is on the
【
ON
】
position, press it once, the
heater will be on 1500W power. Press it again, the heater
will be in standby mode.
Although the patio heater is waterproof, do not use when
raining or in wet conditions.
Never connect the power cable from the electrical supply,
when the patio heater is not in use.
Grounding
