Cleaning
Attention! Regular and careful cleaning helps your heater operate for longer years and
more efficiently.
1- Unplug your power cord for your safety before cleaning your appliance.
2- Press the grid wire of the heater and then remove it.
3- Make sure that the power is off for your safety. Power cord plug must be unplugged.
4- The reflector and filament must be cleaned with a soft cloth, a smooth brush or cool or
dry air. The cloth may be damp but never too wet and the cleaner should not include
any chemical.
5- Refrain from using cleaning material likely to damage the reflector (cleanser etc.).
6- Put the grid wire back on the heater and press the grid wire to fit it in.
9. Technical Service
Attention!
Only technical services and professional maintenance personnel may serve, repair and
replace the spare parts of this heater.
Points to be considered before shipping the product to the technical service:
1- Make sure that the thermostat of your appliance is in “0”mode.
2- Make sure that the plug, to which the appliance is connected, has power, check the
fuse and power cord. If the plug lacks power, consult to an electrician.
3- Make sure that the appliance has been installed in accordance with the instructions in
the manual. If the installation is inaccurate, consult to technical service.
Call the dealer to get service