background image

II

•   The openings should never be covered with a cloth or other material, and the bottom openings 

should not be blocked by placing near or over a radiator or heat source.

•   This Television equipment should be operated only from type of power source indicated on the 

marking label. If you are not sure of the type of power supplied to your home, consult your 

      television dealer or local power company.
•    As a safety feature ,this television equipment is equipped with a grounded power plug, If the plug 

does not fit in your power outlet, contact your electrician. Do not modify the plug and defeat this 
safety feature.

•    Do not allow anything to rest on the power cord. Do not locate this television equipment where the 

cord may be damaged due to lightning and power-line surges.

•    

          

Follow all warnings and instructions marked on the television equipment.

•     If an outdoor antenna is connected to the  television equipment, be sure the antenna system is                                                                                                                                              
      grounded so as to provide some protection against voltage surges and static charges.
•   

                          

For added protection or this television equipment during a lightning storm, or when it is left          

      unattended  and  unused for  long periods of time, unplug it  from the wall outlet and disconnect the  
      antenna. This will prevent damage to the equipment due to lightning and power-line surges.
•     An outdoor antenna system should not  be located in  the vicinity of overhead  power  lines or other          
      electric light or power circuits, or where it can fall into such power lines or circuits. When installing   
      an outdoor antenna system, extreme care should be taken to keep from touching such power lines  
      or circuits as contact with them might be fatal.
•     The mains plug or the appliance coupler is used as the disconnect device, the disconnect device
      shall remain readily operable. The mains plug is connected with the electrical outlet with safety   
      ground wire.
•     Do not over load wall outlets and extension cords as this can result in fire or electric shock.
•     Never push objects of any kind into this television  equipment through cabinet  slots as they may 
     

 

touch dangerous  voltage  points  or  short-circuit internal parts. This could result in a fire or electric  

      shock. Never spill liquid of any kind in the television equipment.
•     Do not attempt to service this television equipment yourself as opening  or removing covers may  
      expose you to dangerous voltage or other  hazards. Refer all servicing to qualified service  
      personnel.
•     Unplug  this television equipment from the wall outlet and refer servicing to qualified service       
      personnel under the following conditions:

— When the power cord or plug is damaged or frayed.
— If liquid has been spilled into the television equipment.
— If the television equipment does not operate  normally by following the operating instructions. 

Adjust only those control that are covered by the operating  instruction as improper adjustment  
of other controls may result in damage and will often require extensive work by a qualified 
technician to restore the television equipment to normal operation.

— If the television equipment has been dropped or the cabinet has been damaged.
— When the television equipment exhibits a distinct change in performance 
—this indicates a need for service.

 

•   UP on completion of any service or repairs to this television equipment ,ask the service technician 

to perform routine safety checks to determine that the television is in safe operating condition.

•  

                               

When replacement  parts are required, make sure that the service technician has used 

   

 

          

replacement parts  specified by the manufacturer that have  the  same  characteristics  as  the 

     original  part.   
     Unauthorized substitutions may result in fire, electric shock, or other hazards.

•   

 

Note to CATV system installer: This  note  is to remind the CATV system installers that the cable     

     ground shall be connected to the grounding system of the  building, as close to  the point of cable 

                                                                   

 entry practical.

Summary of Contents for TFTV6690LED



























Reviews: