background image

Before you ask a specialist

APPENDIX

18

No sound

No Display

Noise with radio sound

Bad sound with tapes

Not recording

Not playing CDs

Remote control does
not work

- No mains supply?
- Volume at minimum?
- Are headphones plugged in the headphone socket?
- Did someone press the MUTE button?

- The power save mode ?
- Replug the AC Cord. 

- Station not tuned accurately? Tune again.
- Weak FM station? Switch to mono using MODE button.
- Weak AM stations? Move the AM antenna slowly for
  better reception.
- Antenna accurately fitted?

- Be sure playing / recording heads and tape guiding
  parts are clean, see bottom of this page.
- Try another cassette.

- Cover the protective hole of the cassette with adhesive
  tape.
- Correct source CD, tape, tuner, AUX selected?

- Load a CD with the label facing upwards.
- CD scratched, broken, deformed, ... Try with another.
- Condensation e.g. after a transport? Wait for a
  while (20-30 minutes).
- CD dirty? Wipe with a soft cloth from the centre to the
  outside.

- Check Batteries polarity? See page 18.
- Batteries run down? Try new ones.
- An object is blocking the direct line between remote
  control and the system. Max distance to the system is
  4-7 m pointing to its front. 

Unplug your sound system from the mains. Open the tape compartments.
After playing and recording for a time, the sound of the tape recorders may
become muffled. Then clean the heads and tape guiding parts.

Only use a soft utensil with
alcohol or a special head
cleaning liquid.

erasing head

playing/

recording head

tape guiding

parts

Cleaning the audio heads of the tape deck

Summary of Contents for PSML-826





















Reviews: