background image

Auto Stop

When the tape reaches the end in playback or recording, the built-in auto stop system will release
the depressed CASSETTE PLAY, RECORD button. The auto stop system operates while recording
from the built-in RADIO or CD player, only the cassette function will stop automatically and the
RADIO or CD player will continue to play.

Type Of Cassettes

Use only good quality cassettes (IEC TYPE 1) for making recordings. The use of C120 cassettes is 
NOT recommended in this machine.

Protecting Recordings

Normally, anything recorded on the tape is automatically erased when new recording is made.
It is possible to protect your recordings from accidental erasure by removing the tabs found on
the rear of the cassette.

When the cassette is held with the recorded side upper-most and exposed tape facing the front,
the protective tab will be found on the right rear of the cassette.
All pre-recorded cassette are protected in this way to prevent accidental erasure of the commercial
recordings. "Protected" cassettes will prevent the CASSETTE RECORD button from being operated.
If at any time you attempt to record and find that this button can not be depressed, never force the
mechanism or it may be damaged. Check that a cassette has been loaded and that tab has not
been removed. Recording on a cassette in which the tabs have been removed can be done by
covering the tab openings with a piece of adhesive tape.

Care Of Cassette Mechanism

Gently clean the tape head and pinch-wheel / capstan assemblies after every 10 hours of operation
until all traces of oxide deposit have been removed. A range of cassette care products are 
available.

The erase head and record / play head and the surface of the pinch roller are delicate and must
not be touched with metal objects such as screwdrivers. You may find it easier to clean the
assembly by pressing the CASSETTE PLAY button to bring head and pinch roller into view. Be
sure to press the CASSETTE STOP button after cleaning the mechanism.
Damage to the pinchwheel can occur if the unit is left in PLAY mode with the power switched off.
Under no circumstances should you attempt to lubricate any part of the machine.

WARNING
Disconnect from the mains at the wall socket when not in use. Do not expose the set to rain or 
moisture. 

4

RECORD/PLAY HEAD

CAPSTAN 

PINCH ROLLER

ERASE HEAD

Summary of Contents for PMC-211











Reviews: