Chapter 2: Introduction
6
Remote control functional key list
PIP/VCR
Switch between PIP and VCR for the secondary
program display.
Note:
For PIP output or VCR output, you can
only select one output at the same time. If PIP is
selected, then VCR can not be selected; If VCR
is selected, then PIP can not be selected. You
can press PIP/VCR button to toggle and select
one mode you desire.
PIP control buttons
ON/OFF:
to turn on/off PIP function.
POS.:
to select PIP position.
PR+/-:
to select next/previous program for PIP.
SWITCH:
to swap the main and sub-pictures if
the secondary display is at PIP status. Or to
switch VCR program to main screen display and
main program to VCR if the secondary display is
at VCR status.
LIST:
to display PIP (or VCR) program list.
Note:
when pressing PIP/VCR and PIP control
buttons, within 5 seconds after corresponding
OSD disappear, if you press digit buttons, DSP,
ASPECT, /-, MUTE buttons, it will
affect PIP picture (or VCR picture). After 5
seconds, it will affect main picture.
16
17
16
17
