background image

5) SYS ( sound system )

This item is used to select sound system. Since this TV model’s RF sound system is B/G only, this
item gets into ineffectiveness in sound system selection.

6) Auto - search (AUTO) 

Press 

CH          

button to highlight 

AUTO

. Press 

VOL       

   button the set will automatically

search and store the active TV signals in your local area from lower band to higher band in the
sequence of  VL    VH     U  with the green bar moving rightward. When a station is located, the set
will store the signals with a channel number from 0. When all the signals are searched and stored,
the TV returns to 0 channel automatically, auto-search is finished.
* After auto-search, all programs colour  system is set to AUTO and in AFT-ON mode.
* During the process of auto-search, if      , 

MENU

 or 

CH          

button is pressed, the searching is

interrupted. Press 

VOL         

 button the searching begins again.

7) SEARCH

Making use of SEARCH function will store a TV program at a referred channel position.

Select a channel number, when 

SEARCH

 is highlighted, press 

VOL         

 button, the set begins to

search for signals upward or downward from current channel. When a station is located, the

searching stops and the program is stored into the referred channel position.

Repeat the above step and store another program signals into another position. If two channels are

same, the previous will be deleted.

When the searching is finished, to store the program signals you should press the 

MENU

 button

to exit the menu and the program signals are stored automatically.

* When the tuning changing reaches the highest (lowest), the searching turns to next band’s lowest

(highest) and continues searching. If the signals are not the signals you desire, you can press the

VOL         

 button again until the desired signals are searched.

8) Manual search (MANUAL)

When some program’s picture or sound is not good, you can make use of this function to fine tune

the tuning voltage.

Press 

VOL          

 button to highlight 

MANUAL

. Press  

VOL    

      successively, the set begins

searching upward or downward. When the picture has obtained the optimum effect, release the

button.

To store the effect you should press the 

MENU

 button to exit the menu and the effect is stored

automatically.

10

Summary of Contents for 7128





















Reviews: