Palsonic 7118, Owner'S Manual

Page: 20 / 23

To select the input press the VIDEO button on the TV set or the AV button on the remote
controller repeatedly until you see the corresponding input indication on the screen. To return to
aerial input, press the AV button until it displays programme number, or press direct channel
select button or the CH button.
VIDEO 1 VIDEO 2
VIDEO 3
If the colour of video input is abnormal , the colour system setting may be incorrect. Press the
SYS button button to display COLOUR AUTO If not, press the or button until normal colour
appears
Note on the S-VIDEO terminal
The S-VIDEO input terminal has priority over the video 1, video 2 VIDEO terminals on the
rear and the video 3 VIDEO terminals on the left side. To use equipment connected to the video
terminals, disconnect any plug from the S-VIDEO terminal
2. To connect MONITOR output terminals
You can connect a stereo system to the MONITOR output terminals (photo type) on the set
to enjoy a high - quality sound from the stereo system. The MONITOR output terminals
output the video and audio signals being displayed on the screen.
18
TV
yellow (video)
white (audio L/MONO)
red (audio R)
(MONITOR)
To external input
Stereo System
(Another VCR for recording)
signal
To video input
To audio input