background image

16. DIGITAL BUTTON

In single-digit mode, press these buttons to select any of 0~9 channels.
In double-digit mode, press these buttons to select any of 00~39 channels.

LISTENING TO STEREO/DUAL-CHANNEL TV SOUND

The Model 6138 is fitted with full performance Stereo Theatre Sound where the internal

speakers are ducted to the front of the set for maximum stereo effect. The Model 6138 is 

fitted with separate bass and treble controls available on the front panel and these should be

used to give the most enjoyable results tailored to your own taste in sound.

The audio response has been adjusted by the factory to give best results across a range of

movies and studio programs, but there will be some programs where the stereo effect is too

pronounced and may detract from the overall performance. This is particularly noticeable

no some outside broadcasts and movies, where sibilance in speech  is heard as lisping or

spitting on 'S' and 'T' sounds. In this case, the set should be switched back to MONO 

using the handset) when the lisping sound will be more acceptable. It is a characteristic of

stereo sound that such flaws in the broadcast system are much more audible.

Stereo on a good program adds a new dimension to sound, but it can also be annoying on

a bad movie or on an uncontrolled outside-broadcast. In this case, switch back to MONO

using the handset and the Stereo effect is removed. You have full control over the sound

with the bass and treble controls. Reducing bass and treble will give a better result on both

Stereo and Mono.

TRANSMISSION MODE INDICATION

Transmission Mode

Stereo

Forced Mono Selection

ON

ON

OFF

Dual Sound 

OFF

ON

Stereo Selection

Sound I Selection

Sound II Selection

OFF

OFF

ON

ON

ON

LED (Red)

sound II

sound I

LED (Yellow)

9

Mono

.

17. BALANCE LEFT/RIGHT

Press these two buttons to balance the Sound between left and right. The left button
reduces the volume of the right speaker: the right button reduces the volume of the left
speaker.

Summary of Contents for 6138



















Reviews: