5.2
System Settings
5.2.1
Setup Wizard
•
Time/date
Display format
Select 12 or 24 as the time format.
Auto-update
The time and date can be updated manually or automatically from
DAB, FM or network.
Auto-update works with data sent over DAB, FM or the Internet. The
clock is only updated when in a corresponding mode, so it is best to select
a mode you use regularly.
DAB and FM use time signals broadcast with radio transmissions.
Network uses a time signal sent from the Internet radio portal when in any
network-connected mode.
Time zone, daylight
Set your time zone. If you country uses daylight saving and it is in
effect, turn on the Daylight savings option.
Manual update
If you set No update, the wizard prompts you to set the time and
date manually. The date and time are displayed as dd-mm-yyyy and
hh:mm.
The active value appears as flashing. Adjust each value with the
navigate reel or
/
on the remote control. Once the value is set, press
the reel or ENTER (SCAN) on the remote control to continue setting with
next value.
