4
MODEL
PJC-W13FN
PJC-S13FN
PJC-W13FL
PJC-S13FL
Space Heater Type
Convection Heater
Convection Heater
Gas Input - High (MJ/h)
13.5
13.5
Gas Input - Low (MJ/h)
5.2
5.2
Output (kW)
3.44
3.44
AS4553 Efficiency Star Rating
5.9
5.9
AS4553 Annual Energy Consumption
4247
4247
AS4553 Emission Star Rating
4.0
3.0
AS4553 NO
2
Emmission Performance (ng/J)
2.0
3.0
Approx. Heating Capacity - Maximum (Sq.m)
52
52
Minimum Room Sizing (Cu.M)
33.75
33.75
Test Point Pressure (kPa)
0.55
1.57
Test Point Pressure at Turndown
0.07
0.26
Injector Sizes (mm)
1.9
1.18
HOSE Connections (mm)
Φ 9.5
Φ 9.5
Gas Hose Length (M)
1.5
1.5
Electricity Consumption
30
30
Electrical Cord length
1.5
1.5
Electrical Supply
240V/50Hz/1Phase
240V/50Hz/1Phase
Colours
Off White & Silver
Off White & Silver
Heater WEIGHT (KGS)
10.9
10.9
Heater External Dimensions HxWxD
436x531x206
436x531x206
(1) Remove heater from carton.
(2) Please ensure that the gas specified on the rating plate matches your gas supply.
WARNING:
Using a different type of gas may cause an explosive ignition resulting in injury, damage to heater or
malfunction of the oxygen depletion safety system. Do not install heater if it is the wrong gas type.
Please contact your place of purchase immediately.
(3) Check room sizing – refer specifications. Do not install if the actual room size is less than the specified
minimum room size requirements as the heater may shut down due to oxygen depletion.
(4) A dedicated 240V Earthed 10 Amp power point must be used with this heater.
Notice to Victorian Customers:
This appliance must be installed by a licensed person as required by the
Victorian Building Act 1993. Only a licensed person will give you a compliance certificate showing that the
work complies with all relevant standards. Only a licensed person will have insurance protecting their
workmanship for 6 years. Make sure you use a licensed person to install this heater and ask for a
compliance certificate. – Message from the Victorian Plumbing Commission.
Preparation
Specifications
