background image

 

1

          

 

 

 

UNFLUED PORTABLE GAS CONVECTION 

ROOM HEATER 

 

 

 
 
 

 
 
 

 

CUSTOMER INSTALLATION  

AND 

OPERATING INSTRUCTIONS 

 

 

Thank you for purchasing a Paloma/Rheem Convection Gas Space Heater 

 

 
 
 
 
 
 
 
 
 
 

1.  To operate and maintain this appliance safely and correctly, please read these instructions 

thoroughly. 

2.  This appliance must be installed in accordance with: 

a.  Local Gas Fitting Regulations 
b.  Municipal Building Codes 
c.  Australian Standard for Gas Appliance Installations AS/NZS5601.1:-2010 
d.  Any other relevant Statutory Regulation 
e.  Manufacturer’s installation instructions 

3.  This appliance must be serviced by a qualified person. 
4. 

Room heater application:

 This unflued gas portable convection heater is designed for use in a 

single family domestic dwelling for the purpose of room heating. Its use in an application other 
than this may shorten its life. 

To suit Paloma & Rheem Models: 

PJC-W15FR & PJC-S15FR 

PJC-W18FR  

PJC-W25FR, PJC-S25FR & PJC-C25FR 

RAC-W25FR, RAC-S25FR & RAC-C25FR 

 

Gas Types:

 Natural Gas (NG) or Propane (LPG)  

Summary of Contents for PJC-C25FR





























Reviews: