background image

10

Robata Outdoor Burner Owner and Installation Manual

TROUBLESHOOTING

WARNING:

Turn off appliance and let cool before 
servicing.  Only a qualified service 
person should service and repair this 
appliance.

IF YOU SMELL GAS:

Shut off gas supply.
Do not try to light any appliance.
Do not touch any electrical switch; do not use any phone in the vicinity of the appliance.

Immediately call your gas supplier from a safe distance.  Follow your gas supplier’s instructions.

OBSERVED PROBLEM 

                     POSSIBLE CAUSE 

 

         REMEDY

 

Unit is smoking / sooting excessively. 
(Note: It is natural and unavoidable for 
appliance sets to produce moderate 
levels of carbon (soot) where flames 
contact the media.)

1.  Poor fuel quality

2.  Excessive flame impingement or 

blockage

3.  Improper fuel/air mixture

1.  Contact local natural gas 

company

2.  Separate the stones to allow 

more flame passage

3.  Remove any foreign items from 

the flame pattern and/or check 
for proper orifice sizing

Burner is excessively noisy
(Note: The movement and combustion 
of gas will create low, unavoidable 
levels of noise.)

1.  Passage of air/gas across irregular 

surfaces

2.  Excessive gas pressure on natural 

gas units

1.  Relieve any tight bends or kinks 

in gas supply line

2.  Check/reset gas regulator 

pressure

Gas odor even when power is off

1.  Gas leak. See Warning statement 

above.

2.  Main gas valve defective.

1.  Locate and correct all leaks (see 

Checking Gas Connections, pg 5)

2.  Replace gas valve

Unit produces unwanted odors

1.  Gas leak. See Warning statement 

below.

1.  Locate and correct all leaks (see 

Checking Gas Connections, pg 5)

IMPORTANT: Operating unit where 
impurities in air exist may create 
odors. Cleaning supplies, paint, 
paint remover, cigarette smoke, 
cements and glues, new carpet or 
textiles, etc., create fumes. These 
fumes may mix with combustion 
air and create odors. These odors 
will disappear over time.

Summary of Contents for ROBATA ROB-36
















Reviews: