3
BENTO 42 CORTEN FIRE PIT Match-lit | Installation & Owner's Manual
BASIC ASSEMBLY
CONTROL KEY
PILOT ASSEMBLY
BURNER RING
BURNER MEDIA PAN
PIPE ADAPTER
FLEX CONNECTOR
VALVE
BODY
1. UNPACK: Account for all parts (see p. 20)
2. FRAGILE: Handle with care
3. LEVEL: Place on a solid, level surface
4. AIR VENTS: Do not block ventilation holes
in base - if applicable (see p. 4)
5. GAS / PROPANE: Supply line is routed
through the base of the unit and must be
installed by licensed trades.
6. MEDIA TOPPINGS: Review correct
placement (p. 7-8)
CAUTION: COR-TEN STEEL is designed
to oxidize and form a protective layer
that resists corrosion. This layer can take
several months to stabilize depending on
climate and weather conditions. Rust will
bleed until it stabilizes.
Do not place Cor-Ten fire pits on surfaces
that will be permanently damaged or
stained by rust bleed.
TOPPING TRAY