PaloAlto Networks PA-500, Reference Manual

Page: 10 / 20

Equipment Rack Installation
10 • Installing the Hardware Palo Alto Networks
•
Allow clear space on the sides and back of the firewall.
Equipment Rack Installation
Figure 3 shows how rack mounting brackets are attached to the PA-500. You can attach the
brackets using the holes at the front of the unit.
Figure 3. Attaching Rack Mounting Brackets
The following safety guidelines apply to rack installation:
•
Elevated ambient operating temperature —If the PA-500 is installed in a closed or multi-
unit rack assembly, the ambient operating temperature of the rack environment may be
greater than the ambient room temperature. Verify that the ambient temperature of the
rack assembly meets the maximum rated ambient temperature requirements listed in
“Environmental Specifications” on page 18.
•
Reduced air flow —Ensure that the airflow required for safe device operation is not
compromised by the rack installation.
•
Mechanical loading —Ensure that the rack-mounted device does not cause hazardous
conditions due to uneven mechanical loading.
•
Circuit overloading —Ensure that the circuit that supplies power to the device is
sufficiently rated to avoid circuit overloading or excess load on supply wiring. Refer to
“Electrical Specifications” on page 18.
•
Reliable earthing —Maintain reliable earthing of rack mounted equipment. Pay special
attention to supply connections other than direct connections to the branch circuit (such
as use of power strips).