background image

Before You Begin

Use this guide to install and begin setting up your Palo Alto Networks

®

 PA-220R next-generation firewall. Refer to the PA-220R 

Next-Gen Firewall Hardware Reference at 

https://docs.paloaltonetworks.com/hardware

 for safety information, specifications, 

and more detailed procedures for installing your firewall.

 

Verify that the installation site has a DC power source.

 

Unpack the equipment and verify that you received the following items: 

Install the Firewall

There are four ways to install the PA-220R firewall:

 

On a flat surface

 

On a DIN rail

 

On a wall

 

In a 19-inch equipment rack

Install on a Flat Surface

  

Attach the rubber pads to the recessed circles on the bottom of the firewall (Figure 1) and place the firewall securely on a stable 
flat surface (right-side up).

Install on a DIN Rail

You can attach the DIN bracket to either the back or to the bottom surface of the firewall. Choose the option that best fits the 
installation site.

Attach a 35mm DIN rail (not included) to the wall where you will install the firewall.

Attach the DIN bracket to the back (Figure 2) or bottom surface (Figure 4)of the firewall (use the DIN bracket captive screws). Ensure that 
the spring-loaded clips on the DIN bracket are oriented so that they will grasp the bottom of the DIN rail.

Engage the bottom of the DIN bracket (with spring-loaded clips) with the bottom part of the DIN rail. Push the firewall and bracket upward 
to fully compress the spring-loaded clips against the rail and then pivot the firewall toward the wall so that the top clips on the bracket will 
grasp the top of the rail as you carefully lower the firewall to decompress the clips and secure the firewall on the DIN rail (Figure 3 or Figure 
5).

Qty

Description

1

PA-220R next-generation firewall.

1

Standard Type-A USB to micro USB console cable.

1

DB-9 female to RJ-45 male console cable.

1

Shielded RJ-45 CAT6 Ethernet cable for management (MGT) port access.

1

DC terminal block.

4

Rubber pads for a desktop installation.

1

DIN bracket for a DIN rail installation.

1

End User License Agreement (EULA).

1

China Restriction of Hazardous Substances (RoHS) declaration.

DIN Bracket

Spring-loaded

DIN Bracket Clips

Cap ve Screw

Cap ve Screw

Capve Screw

Spring-loaded

DIN Bracket Clips

DIN Bracket

Capve Screw

DIN Rail

Spring-loaded

DIN Bracket Clips

Wall

DIN Rail

Spring-loaded

DIN Bracket Clips

Wall

Figure 2

Figure 4

Figure 3

Figure 5

Figure 1

PA-220R

Quick Start Guide

1

2

 

The PA-220R firewall ships with rubber pads (to install the firewall on a flat surface) and a DIN rail bracket (to install the firewall on a DIN 
rail). The wall-mount kit and 19-inch equipment-rack kit are optional and purchased separately—refer to the PA-220R Next-Gen Firewall 
Hardware Reference for the wall-mount and rack-kit installation procedures. 

docs.paloaltonetworks.com

Page 1 of 2

Reviews: