PaloAlto Networks M-700, Hardware Reference Manual

Page: 32 / 54

Install the M-300 and M-700 Appliance
Connect Power to an M-300 or M-700 Appliance
M-300 and M-700 appliances have two AC power supplies (the second power supply is for
redundancy). For details on power requirements and power consumption, see M-300 and M-700
Electrical Specifications .
• Connect AC Power to an M-300 or M-700 Appliance
Connect AC Power to an M-300 or M-700 Appliance
The following procedure describes how to connect AC power to an M-300 or M-700 appliance.
To avoid injury to yourself or damage to your Palo Alto Networks
®
hardware or the data
that resides on the hardware, read the Product Safety Warnings .
STEP 1 | Plug two AC power cables (provided) in to grounded wall outlets.
Connect the second power cord through a different circuit breaker to provide power
redundancy and to allow for electrical circuit maintenance.
STEP 2 | Insert one power cord in to each of the two power supplies on the back of the appliance.
STEP 3 | Press the power button on the front of the appliance.
If only one power supply is connected, a warning beep will sound.
M-300 and M-700 Appliance Hardware Reference 32
©
2023 Palo Alto Networks, Inc.