Install ION 3000
The Prisma SD-WAN ION 3000 can be installed in two different modes—in analycs
or control mode with an exisng router or in the control mode by replacing the router.
By installing the ION with an exisng router, you can physically insert the ION 3000
into a network, thereby reducing interrupon and inseron planning to a minimum. Or
you can install the ION 3000 to replace an exisng router, especially in environments
where routers are not already present or required.
>
>
Set Up the ION 3000 with an Exisng Router
>
Set Up the ION 3000 by Replacing the Router
23
