PaloAlto Networks ION 2000, Hardware Reference Manual

Page: 26 / 34

Install ION 2000
Wall Mount the ION 2000
Mount the Prisma SD-WAN ION 2000 on the wall using the oponal wall mounng kit.
STEP 1 | Gather the wall mounng brackets.
STEP 2 | Turn the ION device upside down and locate the four (4) screw holes on each corner of the
device.
STEP 3 | Place the brackets on each side of the device, making sure to align the screw holes on the
bracket and the device.
STEP 4 | Insert the screws to secure the brackets.
STEP 5 | Place the device on the wall where it will be mounted. Mark the wall with circles for each
screw hole so it can be used later to insert the wall anchors.
STEP 6 | With a power drill, apply the four (4) white wall anchors into the screw holes.
ION 2000 Hardware Reference 26
©
2021 Palo Alto Networks, Inc.