PA168X SIP Phone Http Setup Guide (V1.60)
14
●
dtmf payload :
When DTMF select
rfc 2833
.This parameter can be used
indicating type of RTP payload type. The value can be use integer
96-101.
●
prack:
Enable/disable support pre-ack(RFC3262) by checking/clearing
this box.
●
super password:
Set the super password of the phone.(Default super
password is 12345678).
●
debug:
Set the debug level of the phone.
disable:
Disable output the debug message by selecting this item.
output:
Output the operation information to the window, such as
register, input by selecting this item.
output all:
Output all debug information and data in test window by
selecting this item.
remote debug:
Save
the debug information in SDRAM of IP phone
by selecting this item.
no check:
Disable checking firmware tags when upgrading. This is
not suggested, because it will increase the risk of upgrading the
wrong firmware into the phone.
