Version 1.0.3 dated 2014-05-14
Page 24
Original operating instructions
TU1503V
GB
4.5
Cross slide
The cross slide is connected to the lathe saddle (saddle slide) with the help of a dovetail slide-
way. Movement is at right angles to the workpiece axis by means of the cross slide.
4.6
Tailstock
The tailstock consists of a guide plate with gripping yoke and upper part. It is readjusted manu-
ally and clamped on the slideways of the lathe bed with the help of the clamping screw and the
gripping yoke. The upper part houses the spindle sleeve. It has a small inside cone MT1 in
shortened version. The spindle sleeve may be adjusted longitudinally via a threaded spindle.
Clamping is by means of a clamping screw.
Img.4-5:
Tailstock
Tailstock