3
Palmgren Operating Manual & Parts List
61051C, 61201C, 61301C & 61401C
•
Loosen the two set screws slightly with a wrench (not
supplied) and slide the Collar over the Ram. Position the
Collar at the desired height and tighten both the set
screws
•
For precise depth stop adjustment, turn the screw on the
hex nut to the desired height. Secure the position of the
screw by tightening the hex nut until it bottoms out on
the arbor press frame.
MAINTENANCE
•
Oil the pinion periodically through the oil fitting, and
grease the ram rack whenever necessary. Keep a light film
of oil on machined surface to prevent rust. Keep work area
clean. Clean the arbor press of dirt and debris after every
use.
•
If the ram is loose and drops by itself, loosen hex nuts
and tighten screws (Ref. Nos. 11 and 12) for adjustment.
All screws should be tightened with the same amount of
pressure. Secure set screws by tightening nuts.
WARRANTY
Palmgren warrants their products to be free of deficiency in material or workmanship. The duration of this warranty is
expressively limited to one year parts and labor unless otherwise noted beginning from the date of delivery to the original
user. The following Palmgren products carry the following warranties on parts with a 1 year warranty on labor:
The obligation of Palmgren is limited solely to the repair or replacement, at our option, at its factory or authorized repair
agent of any part that should prove deficient. The warranty does not cover expendable and/or wear parts (i.e. v-belts, coated
abrasives), damage to tools arising from alteration, abuse or use other than their intended purpose, packing and freight.
Purchaser must lubricate and maintain the product under normal operating conditions at all times. Proper use and care
instructions are provided in the operator’s manual. Failure to follow these instructions will void the warranty.
This warranty is the purchaser’s exclusive remedy against Palmgren for any deficiency in its products. Under no circumstances
is Palmgren liable for any direct, indirect, incidental, special or consequential damages including lost profits in any way related
to the use or inability to use our products. This warranty gives you specific legal rights which may vary from state to state.
SERVICE & REPAIR
1. If a Palmgren product requires a repair or warranty service
DO NOT
return the product to the place of purchase.
2. All warranty related work must be evaluated and approved by Palmgren.
3. Prior to returning any item the user must obtain factory approval and a valid RGA number.
4. For instructions and RGA number call toll free (800) 621-6145.
•
USA Machine vises – Lifetime
•
Imported Machine vises – 2 years
•
Bench vises – 2 years
•
Positioning tables – 2 years
•
Bench grinders & buffers – 3 years
•
Tapping machines – 2 years
•
Drilling machines – 2 years
•
Finishing machines – 2 years
•
Band saws – 2 years
•
Work stands – 2 years
