8
Re-Load Instructions RevD
Toll Free: 800-788-1028 •
www.NomadFlexibleFurniture.com
5. Using your Re-Load
“RELOAD” YOUR MOBILE DEVICES — ASSUMING NO OTHER
CONNECTIONS ARE MADE
5.1 Align “A” wire connector with “C” wire connector
5.2 Gently push connection together.
5.3 Charging Hub should be lit BLUE (If the LED is RED more charging may be needed).
5.4 Slowly close the worksurface down making sure all wires are kept inside battery
compartment and not in the way of getting pinched. (Figure A, page 4 #06)
5.5 Push in lock to lock handle. Remove key. Your Re-Load is now ready for use.
NOTE:
The Re-Load table will charge many devices including cell phones, tablets, cameras,
audio speakers and more. Charging times will vary depending on the mobile device and
how many other devices are being charged at that time. Do not charge mobile devices with
the Re-Load table that cannot accept a charge or are damaged. A 7.5A blade fuse is used
to assist circuitry protection. The Re-Load table Charging Station is only for charging mobile
devices. It will not transfer data.
