8
Using the Lmic
The Lmic is simple to operate. Select either the probe rods or the tripod unit and
screw into the microphone unit. (Use the tripod foot on hard ground and use the
probe rods on soft ground or when accessing water pipe fittings).
Connect the headphones to the rear connector and connect the microphone cable to
the forward connector. Put on the headphones and press the trigger button
underneath the hand-held unit to listen for leaks.
The volume/sensitivity can be adjusted using the rotary control.
LED indication
The green LED shows when the unit is operating and the red LED indicates low
battery power.
Care of the Lmic
The Lmic should be kept clean and dry and, where necessary, cleaned with a damp
cloth; abrasive materials must not be used.
The Lmic in use
