Palmer 4049521108846 User Manual Download Page 4

EN

EN

EN

FR

DE

DE

ES

ES

6

7

SAFETY INFORMATION

1.  Please read these instructions carefully. 
2.  Keep all information and instructions in a safe place. 
3.  Follow the instructions. 
4.  Observe all safety warnings. Never remove safety warnings or other information from the equipment. 
5.  Use the equipment only in the intended manner and for the intended purpose. 
6.  Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain 

that wall mounts are properly installed and secured. Make certain that the equipment is installed 
securely and cannot fall down. 

7.  During installation, observe the applicable safety regulations for your country. 
8.  Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. 

Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat. 

9.  Never place sources of ignition, e.g., burning candles, on the equipment. 
10.  Ventilation slits must not be blocked. 
11.  Do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equip-

ment - in this case, observe the special instructions noted below. Do not expose this equipment to 
flammable materials, fluids or gases. 

12.  Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled 

with liquids, such as vases or drinking vessels, on the equipment. 

13.  Make certain that objects cannot fall into the device. 
14.  Use this equipment only with the accessories recommended and intended by the manufacturer. 
15.  Do not open or modify this equipment. 
16.  After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to 

tripping hazards. 

17.  During transport, make certain that the equipment cannot fall down and possibly cause property damage 

and personal injuries.

18.  If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment 

or if it has been damaged in another way, switch it off immediately and unplug it from the mains outlet 
(if it is a powered device). This equipment may only be repaired by authorized, qualified personnel. 

19.  Clean the equipment using a dry cloth. 
20.  Comply with all applicable disposal laws in your country. During disposal of packaging, please separate 

plastic and paper/cardboard. 

21.  Plastic bags must be kept out of reach of children. 

FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:

22.  CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be con-

nected to an outlet with a protective ground. Never deactivate the protective ground of a power cord. 

23.  If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), 

do not switch it on immediately. Moisture and condensation could damage the equipment. Do not switch 
on the equipment until it has reached room temperature. 

24.  Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency 

match the values specified on the equipment. If the equipment has a voltage selection switch, connect 
the equipment to the power outlet only if the equipment values and the mains power values match. If the 
included power cord or power adapter does not fit in your wall outlet, contact your electrician. 

25.  Do not step on the power cord. Make certain that the power cable does not become kinked, especially at 

the mains outlet and/or power adapter and the equipment connector. 

26.  When connecting the equipment, make certain that the power cord or power adapter is always freely ac-

cessible. Always disconnect the equipment from the power supply if the equipment is not in use or if you 
want to clean the equipment. Always unplug the power cord and power adapter from the power outlet at 
the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter with 
wet hands. 

27.  Whenever possible, avoid switching the equipment on and off in quick succession because otherwise 

this can shorten the useful life of the equipment.

28.  IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows 

repeatedly, please contact an authorised service centre. 

29.  To disconnect the equipment from the power mains completely, unplug the power cord or power adapter 

from the power outlet. 

30.  If your device is equipped with a Volex power connector, the mating Volex equipment connector must be 

unlocked before it can be removed. However, this also means that the equipment can slide and fall down 
if the power cable is pulled, which can lead to personal injuries and/or other damage. For this reason, 
always be careful when laying cables. 

31.  Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or 

before extended periods of disuse.

CAUTION: 

    

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Never remove the cover, because otherwise there may be a risk of electric shock. There are no user service-
able parts inside. Have repairs carried out only by qualified service personnel. 

The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user 
to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of electrical shock. 

 

The exclamation mark within an equilateral triangle is intended to alert the user to the presence of 
important operating and maintenance instructions.

Summary of Contents for 4049521108846



























Reviews: