Palm Zire 21, Handbook

Page: 134 / 196

Chapter 14 Setting Preferences for Your Handheld
126
To set the time:
1.
From the General Preferences list, select Date & Time.
2.
Tap the Set Time box.
3.
Tap the up or down arrows to change the hour.
4.
Tap each minute number, and then tap the arrows to change them.
5.
Tap OK.
6.
Tap Done.
To set the time zone and daylight saving time:
1.
From the General Preferences list, select Date & Time.
2.
Tap the Location pick list.
3.
Select Edit List.
4.
Select the location where you want to set the time zone.
5.
Tap Edit to open the Edit Location dialog box.
6.
Follow the steps under “Adding a location” in Chapter 12 to select the time
zone and daylight saving time settings.
7.
Tap Done.
Digitizer Preferences
The Digitizer Preferences screen opens the digitizer calibration screen. This is the
same screen that appears when you start your handheld for the first time.
Calibration aligns the internal circuitry of your handheld with its touch-sensitive
screen so that when you tap an element on the screen, the handheld can detect
exactly which task you want to perform.
You may need to recalibrate your screen after a hard reset or if your digitizer drifts.
You may need to repeat this process until the calibration registers.
To calibrate your handheld screen:
1.
From the General Preferences list, select Digitizer.
2.
Tap the targets as indicated on the screen as precisely as possible.