Using Power To Go to recharge your handheld
5
Using Power To Go to recharge your handheld
Recharging your handheld with Power To Go will take approximately the same
amount of time as if you recharged your handheld with a cradle or cable.
For optimal performance, fully recharge Power To Go before using it to recharge
your handheld.
NOTE
Before recharging your handheld with Power To Go, it is recommended that you
set the Preferences on your handheld so that the screen will stay off when the handheld
is plugged into a cradle. If this is not done, the handheld will recognize Power To Go as
a cradle and the screen will stay on during recharging, slowly draining the batteries.
To recharge your handheld with Power To Go:
1.
Hold down the buttons on the sides of the recharging pack.
2.
Slide your handheld’s universal connector into the 16-pin connector on the
front of the recharging pack.
3.
Press the recharging pack against the handheld.
Summary of Contents for power To Go
Page 1: ...Handbook for Power To Go ...
Page 4: ...Contents iv ...
