3
Palm 4.0(m505,m500,m125) Xpress Ntwk (setup).doc
8.
Enter “
Express Network
“ for the Service name
User Name:
Password:
vzw
(Tap the "
-Prompt-
" box and enter "
vzw
" for the password
if you wish to save it and not enter it before each connection
)
Make sure that the User N ame and Password are in lower case letter and all without quotes.
Tap "
OK
" (
the Password field should no longer read –Prompt-, it should now read
-Assigned-
)
Connection:
Express Network
(this is the Modem definition setup in the connection tab)
9.
Tap "
Details
" then "
Script
"
10.
Enter the Parameters below:
Tap "
End
" and select
"
Send:
" / enter “
AT$QCMDR=3
Tap
End
and select
“
Send CR:
”
Tap
End
and select
“
Send:
” / enter “
ATDT#777
”
Tap
End
and select
“
Send CR:
”
Tap
End
and select
“
Delay:
” / enter “
CONNECT
”
Leave “
End
” as the last parameter
11
. Tap
OK twice
www.Beamalarm.com
